我想做个98/2000双启动光盘，可是教程里的方法没成功

连2000都启动不起来，一进去就死掉，不知道为什么，我完全按照论坛的那张帖子一步一步做的。还有，98的启动镜像怎么弄呢？我是新手，大家给我一些经验吧

修改好的98se.img我已给你发到信箱里了，两个主要的文件修改如下：
1）config.sys:
device=himem.sys /testmem:off
device=oakcdrom.sys /D:mscd001
rem Please select the cdrom driver you need !!!
rem device=btdosm.sys
rem device=flashpt.sys
rem device=btcdrom.sys /D:mscd001
rem device=aspi2dos.sys
rem device=aspi8dos.sys
rem device=aspi4dos.sys
rem device=aspi8u2.sys
rem device=aspicd.sys /D:mscd001
files=10
buffers=10
dos=high,umb
stacks=9,256
devicehigh=ramdrive.sys /E 2048
lastdrive=z
2）autoexec.bat:
@ECHO OFF
set EXPAND=YES
SET DIRCMD=/O:N
set LglDrv=27 * 26 Z 25 Y 24 X 23 W 22 V 21 U 20 T 19 S 18 R 17 Q 16 P 15
set LglDrv=%LglDrv% O 14 N 13 M 12 L 11 K 10 J 9 I 8 H 7 G 6 F 5 E 4 D 3 C
cls
call setramd.bat %LglDrv%
set temp=c:\
set tmp=c:\
path=%RAMD%:\;a:\;%CDROM%:\
copy command.com %RAMD%:\ > NUL
set comspec=%RAMD%:\command.com
copy extract.exe %RAMD%:\ > NUL
%RAMD%:\extract /y /e /l %RAMD%: ebd.cab > NUL
echo The diagnostic tools were successfully loaded to drive %RAMD%.
echo.
LH %ramd%:\MSCDEX.EXE /D:mscd001 /L:%CDROM%
cls
echo Start install Windows 98
echo.
%RAMD%:\smartdrv.exe
%CDROM%:\win98\setup.exe /is %CDROM%:\win98\msbatch.inf
set CDROM=
set LglDrv=

信已收到。多谢您，任我行

我也要。可以吗
goodfrom@163.com
谢谢

up

给我份,顺便发个2000 的!tylzzx@163.com

你的AUTOEXEC。BAT里的%cdrom%变量如何得的？？？
AUTOEXEC。BAT
@ECHO OFF
set EXPAND=YES
SET DIRCMD=/O:N
cls
set temp=c:\
set tmp=c:\
path=a:\
IF "%config%"=="NOCD" GOTO QUIT
LH MSCDEX.EXE /D:oemcd001 /L:D
echo.
IF "%config%"=="SETUP_CD" goto AUTOSETUP
GOTO QUIT
:AUTOSETUP
set CDROM=FOO23
FINDCD.EXE
ECHO %CDROM%
ECHO "%CDROM%"
if "%CDROM%"=="FOO23" goto NOCDROM
path=a:\;%CDROM%\
%CDROM%
cd \SIMPCHIN\WIN98
echo.
OEMSETUP.EXE /K "/IE /NF"
goto QUIT
:NOCDROM
echo.
echo The Windows 98 Setup files were not found.
echo.
:QUIT
CONFIC。SYS
[menu]
menuitem=SETUP_CD, Start Windows 98 Setup from CD-ROM.
menuitem=CD, Start computer with CD-ROM support.
menuitem=NOCD, Start computer without CD-ROM support.
menudefault=SETUP_CD,30
menucolor=7,0
[SETUP_CD]
device=himem.sys /testmem:off
device=oakcdrom.sys /D:oemcd001
device=btdosm.sys
device=flashpt.sys
device=btcdrom.sys /D:oemcd001
device=aspi2dos.sys
device=aspi8dos.sys
device=aspi4dos.sys
device=aspi8u2.sys
device=aspicd.sys /D:oemcd001
[CD]
device=himem.sys /testmem:off
device=oakcdrom.sys /D:oemcd001
device=btdosm.sys
device=flashpt.sys
device=btcdrom.sys /D:oemcd001
device=aspi2dos.sys
device=aspi8dos.sys
device=aspi4dos.sys
device=aspi8u2.sys
device=aspicd.sys /D:oemcd001
[NOCD]
device=himem.sys /testmem:off
[COMMON]
files=60
buffers=20
dos=high,umb
stacks=9,256
lastdrive=z
我用FINDCD命令怎么得不到CDROM的值呢，非常纳闷，我　刻了张98 + 2000的系统启动安装盘。用EASYBOOT4.1制作的。2000正常，98出现The Windows 98 Setup files were not found找不到文件的错误，主要原因在CDROM的值错误，还是%CDROM%＝FOO32，不是光驱的盘符。98目录放在\SIMPCHIN\WIN98，也重新制作了win98.img文件。但run win98.img就是不行。就是%CDROM%这个值不对，请问为什么？？？　太郁闷了。

谢谢!!

麻烦您给我也发一个xzgzs@yeah.net

我也做了不成功，郁闷中！