各位高手：我新购买了一台新的刻录机－sony DRU-710A，可一直不能成功刻录，总是刻到一部分就终止刻录，刻录机工作指示灯 :em16: :em16: :em16: :em16: 一直闪烁，只能强行终止。
我的机器配置具体如下：P4 2.4 768M内存 80G硬盘
原来我用的是一个Benq的cd刻录机，使用时一切正常。
这两天我一直在寻找解决办法，磁盘碎片也整理了，刻录盘用的是清华同方、安泊，甚至重新装了一遍系统（xp sp1）但仍然无济于事，真是比较烦！
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ';f:\Program Files\Ahead\nero\Wnaspi32.dll';: Ver=2.0.1.68, size=160016 bytes, created 2004-7-22 17:33:44
Nero版本： 6.3.1.19
刻录机： <SONY DVD RW DRU-710A> 版本: BYX3 - HA 2 TA 1 - 6.3.1.19
适配卡驱动程序： <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <DVD-16X DVD-ROM BDV316C >版本: .20R - HA 1 TA 1 - 6.3.1.19
适配卡驱动程序： <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST380011A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : DVD-16X DVD-ROM BDV316C atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
DVD-16X DVD-ROM BDV316C H: CDRom0
SONY DVD RW DRU-710A CDRom6
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 766MB (785200kB)
Free physical memory: 503MB (515108kB)
Memory in use : 34 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
30.3.2005
ISO编辑
14:20:02#1 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Continue multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
14:20:03#2 Text 0 File Reader.cpp, Line 118
Reader running
14:20:03#3 Text 0 File Writer.cpp, Line 124
Writer SONY DVD RW DRU-710A running
14:20:03#4 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
14:20:03#5 Text 0 File Burncd.cpp, Line 3173
Turn on 光盘一次刻录, using DVD media
14:20:08#6 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2179455 (484:19.30, 4256MB)
14:20:08#7 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD)
14:20:08#8 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: SONY DVD RW DRU-710A, Media type: DVD+R
Disc Manufacturer ID: YUDEN000, Media Type ID: T02, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3
14:20:08#9 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
14:20:08#10 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 798976 (798976) = #798976/177:33.1
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 798976 blocks [SONY DVD RW DRU-710A ]
--------------------------------------------------------------
14:20:08#11 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [SONY DVD RW DRU-710A ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 5 to 5:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1636302848, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
1380480 | lead-in | 0 | 0x00 | 0x41
1380480 | 5 | 0 | 0x00 | 0x41
1380480 | 5 | 1 | 0x00 | 0x41
2179456 | lead-out | 1 | 0x00 | 0x41
14:20:08#12 Phase 24 File dlgbrnst.cpp, Line 1865
文件暂存过程开始
14:20:08#13 Text 0 File Burncd.cpp, Line 4183
Cache writing successful.
14:20:08#14 Phase 25 File dlgbrnst.cpp, Line 1865
文件暂存过程完成
14:20:08#15 Phase 36 File dlgbrnst.cpp, Line 1865
以8x (11,080 KB/s)的速度开始刻录
14:20:08#16 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #1380480
14:20:08#17 Text 0 File Cdrdrv.cpp, Line 8128
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-ROM (0), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific [16..63]:
00 00 03 59 55 44 45 4E - 30 30 30 54 30 32 00 38 ...YUDEN000T02.8
23 54 37 10 02 4E 72 02 - 8C 63 16 16 0B 0B 0A 0A #T7..Nr..c......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
14:20:08#18 Text 0 File DVDR.cpp, Line 4817
Drive: SONY DVD RW DRU-710A
Book Type request: Physical disc type
Changing the book type was finished with error code: 0
14:20:08#19 Text 0 File dlgbrnst.cpp, Line 1723
Set remaining time: 2:42,897 (162897ms) -> OK
14:20:08#20 Text 0 File DVDPlusRW.cpp, Line 628
Start write address at LBA 1380480
DVD high compatibility mode: No
14:24:39#21 SCSI -500 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 2, TA 1, LUN 0, buffer 0x04850000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x1B 0x20 0x60 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
14:24:39#22 CDR -500 File Writer.cpp, Line 304
SCSI命令中止
SONY DVD RW DRU-710A\H2 T1
14:24:40#23 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
14:24:40#24 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
14:24:44#25 SCSI -500 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 2, TA 1, LUN 0, buffer 0x03A76000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
14:24:44#26 SCSI -500 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 2, TA 1, LUN 0
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x35 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
14:24:44#27 Text 0 File dlgbrnst.cpp, Line 1723
Set remaining time: 0:00,000 (0ms) -> OK
14:24:44#28 SCSI -500 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 2, TA 1, LUN 0, buffer 0x03A76000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
14:24:44#29 SCSI -500 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 2, TA 1, LUN 0, buffer 0x03A76000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0xDF 0x00 0x0F 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
14:24:44#30 CDR -500 File WriterStatus.cpp, Line 164
SCSI命令中止
SONY DVD RW DRU-710A\H2 T1
14:24:44#31 TRANSFER -24 File WriterStatus.cpp, Line 164
无法进行光盘一次刻录的结束动作
14:24:44#32 SCSI -500 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 2, TA 1, LUN 0, buffer 0x03A746D0
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x5A 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x48 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
14:24:45#33 SCSI -1066 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 2, TA 1, LUN 0, buffer 0x03A746D0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x5A 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x48 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
14:24:45#34 Text 0 File dlgbrnst.cpp, Line 1723
Set remaining time: 0:00,000 (0ms) -> OK
14:24:45#35 CDR -1066 File WriterStatus.cpp, Line 169
无效的指令字段
14:24:45#36 TRANSFER -39 File WriterStatus.cpp, Line 169
无法执行结束动作
14:24:46#37 Phase 38 File dlgbrnst.cpp, Line 1865
以8x (11,080 KB/s)的速度刻录失败
Existing drivers:
File ';Drivers\atapi.sys';: Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 2002-8-29 1:27:50 (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
[color=#FF8C00]文字
