http://www.msfn.org/board/index.php?showtopic=10665
以上是我在MSFN发的帖子，没什么时间翻译回中文了。就贴英文的出来吧！^_^，
为了照顾国内的朋友，还是再简单翻译一下吧
具体过程如下：
Many people use batch files such as "start wait ........\dxsetup.exe" to update Directx 8.1 to Directx 9.0, but why windows setup intall Directx 8.1 first ,and then install Directx 9.0last? , BTW, I think it will get more time for windows setup.
许多做集成光盘的朋友使用"start wait ........\dxsetup.exe"的批命令处理文件来把DX8升级到DX9，但是为什么要让windows 安装程序先安装DX8，然后又安装DX9呢？我想这会浪费很多的时间
so, I replace the Directx 8.1 install with Directx 9.0 install during windows setup:
所以，我直接把安装光盘上的DX8替换成DX9
1)download DirectX 9.0b Redistributable here:
http://download.microsoft.com/downl...x90b_redist.exe
首先，下载DX9版本，这个连接是英文的，中文的自己找一找！
2)Execute dx90b_redist.exe, accept the EULA, then choose to extract to temp folder:
运行dx90b_redist.exe。选择接受许可协议，然后释放文件到临时目录\temp
3)del ususe files on this temp folder, only keep two files:
BDAXP.CAB
DXNT.CAB
把temp目录的文件全部删除，仅保留：
BDAXP.CAB
DXNT.CAB
4)Extraxt this two .cab files to one folder"dx9"
把这两个.cab文件全部提取到一个目录：\dx9
5)open the file named"dxver.inf",and then mark all it will addreg or delreg
key to regfiles:
[version]
Signature="$Windows NT$"
[DefaultInstall]
AddReg=add.reg
[add.reg]
HKLM,"%DX%"
HKLM,"%DX%","Version",,"4.09.00.0902"
HKLM,"%DX%","RC",,"2"
HKLM,"%DX%","Debug",,"0"
HKLM,"%DX%","InstalledVersion",0x00030001,00,00,00,09,00,00,00,00
[Strings]
DX = "Software\Microsoft\DirectX"
打开dxver.inf,把里面的内容全部记录下来
6)ren this filenameyou need to del the old files"dinput.dll" first.etc)
dinput.xpg--->dinput.dll
dinput8.xpg--->dinput8.dll
dxapi.xpg---->dxapi.sys
gcdef.xpg---->gcdef.dll
joy.xpg---->joy.cpl
pid.xpg---->pid.dll
把dx9目录里的上述文件改名（你首先要删除某些文件。例如dinput.dll等等）
7)del all the *.inf/*.sys/*.png/*.ini
,but keep the file "dxdllreg.inf"
;if you don't del *.sys files ,you will get a warning box during GUI setup "driver whql"
删除所有的*.inf/*.sys/*.png/*.ini，但保留dxdllreg.inf
8)ren dpnlobby.dll to dpnlobby.xpg
ren dpnaddr.dll to dpnaddr.xpg
ren dx9bdaxp.cat to dx9bda.cat
依次把上面3个文件改名
9)remove dx9bda.cat and dxxp.cat to \i386\svcpack.and then add lines in you svcpack.inf "[ProductCatalogsToInstall] ":
dxxp.cat
dx9bda.cat
把dxxp.cat、dx9bda.cat复制到\i386\svcpack，并且在 svcpack.inf 里的[ProductCatalogsToInstall] 内添加
dxxp.cat
dx9bda.cat
;
;这里会在下次启动的时候调入cleanup.cmd,以便替换dpnlobby.dll 和dpnaddr.dll
;
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\RunOnce]
"CLEANUP"=hex(2):63,00,6d,00,64,00,20,00,2f,00,63,00,20,00,73,00,74,00,61,00,\
72,00,74,00,20,00,2f,00,6d,00,69,00,6e,00,20,00,63,00,6d,00,64,00,20,00,2f,\
00,63,00,20,00,25,00,53,00,59,00,53,00,54,00,45,00,4d,00,52,00,4f,00,4f,00,\
54,00,25,00,5c,00,53,00,59,00,53,00,54,00,45,00,4d,00,33,00,32,00,5c,00,43,\
00,4c,00,45,00,41,00,4e,00,55,00,50,00,2e,00,43,00,4d,00,44,00,00,00
; it would call the cleanup.cmd at next boot
;cleanup.cmd will replace dpnlobby.dll and dpnaddr.dll
建立如上内容的dx9.reg的文件
11)create the file named"dx9.inf"
[version]
Signature="$Windows NT$"
[DefaultInstall]
AddReg=add.reg
[add.reg]
HKLM,"%DX%"
HKLM,"%DX%","Version",,"4.09.00.0902"
HKLM,"%DX%","RC",,"2"
HKLM,"%DX%","Debug",,"0"
HKLM,"%DX%","InstalledVersion",0x00030001,00,00,00,09,00,00,00,00
HKLM,"%KEY_WIN_CURVER%\RunOnce","dx9_dllreg",0x00020002, "%systemroot%\system32\dxdllreg.exe"
HKLM,"%KEY_WIN_CURVER%\RunOnce","dx9_update",0x00020002, "%systemroot%\regedit.exe /s %systemroot%\system32\dx9.reg"
[Strings]
KEY_WIN_CURVER="Software\Microsoft\Windows\CurrentVersion"
DX = "Software\Microsoft\DirectX"
建立如上内容的dx9.inf文件
12)create the file name"cleanup.cmd":
IF EXIST %SYSTEMROOT%\SYSTEM32\dllcache\dpnaddr.dll REN %SYSTEMROOT%\SYSTEM32\dpnaddr.dll dpnaddr.OLD > NUL
IF EXIST %SYSTEMROOT%\SYSTEM32\dpnaddr.XPG copy "%SYSTEMROOT%\SYSTEM32\dpnaddr.XPG" "%SYSTEMROOT%\SYSTEM32\dllcache\dpnaddr.dll" > NUL
IF EXIST %SYSTEMROOT%\SYSTEM32\dllcache\dpnlobby.dlL REN %SYSTEMROOT%\SYSTEM32\dpnlobby.dlL dpnlobby.OLD > NUL
IF EXIST %SYSTEMROOT%\SYSTEM32\dpnlobby.XPG copy "%SYSTEMROOT%\SYSTEM32\dpnlobby.XPG" "%SYSTEMROOT%\SYSTEM32\dllcache\dpnlobby.dll" > NUL
IF EXIST %SYSTEMROOT%\SYSTEM32\dpnaddr.dll REN %SYSTEMROOT%\SYSTEM32\dpnaddr.dll dpnaddr.OLD > NUL
IF EXIST %SYSTEMROOT%\SYSTEM32\dpnaddr.XPG REN %SYSTEMROOT%\SYSTEM32\dpnaddr.XPG dpnaddr.DLL > NUL
IF EXIST %SYSTEMROOT%\SYSTEM32\dpnlobby.dlL REN %SYSTEMROOT%\SYSTEM32\dpnlobby.dlL dpnlobby.OLD > NUL
IF EXIST %SYSTEMROOT%\SYSTEM32\dpnlobby.XPG REN %SYSTEMROOT%\SYSTEM32\dpnlobby.XPG dpnlobby.dlL > NUL
IF EXIST %SYSTEMROOT%\SYSTEM32\CLEANUP.CMD DEL %SYSTEMROOT%\SYSTEM32\CLEANUP.CMD > NUL
建立如上内容的cleanup.cmd文件
13)at last "dx9 "folder look like this:
最后你的dx9目录应该类似这样：
amstream.dll
d3d8.dll
d3d8thk.dll
d3d9.dll-------;>new
d3dim700.dll
ddraw.dll
ddrawex.dll
devenum.dll
dijoy.hlp
dimap.dll
dinput.dll
dinput8.dll
dmband.dll
dmcompos.dll
dmime.dll
dmloader.dll
dmscript.dll
dmstyle.dll
dmsynth.dll
dmusic.dll
dplaysvr.exe
dplayx.dll
dpmodemx.dll
dpnaddr.XPG;--->new
dpnet.dll
dpnhpast.dll
dpnhupnp.dll
dpnlobby.XPG;----->new
dpnsvr.exe
dpvacm.dll
dpvoice.dll
dpvsetup.exe
dpvvox.dll
dpwsockx.dll
dsdmo.dll
dsdmoprp.dll
dsound.dll
dsound3d.dll
dswave.dll
dx7vb.dll
dx8vb.dll
dxdiachs.chm
dxdiag.chm
dxdiag.exe
dxdiagn.dll;--->new
dxdllreg.exe;-->new
dxdllreg.inf;-->new
encapi.dll
ksuser.dll
mciqtz32.dll
msdmo.dll
mswebdvd.dll
qasf.dll
qcap.dll
qdv.dll
qdvd.dll
qedit.dll
qedwipes.dll
quartz.dll
dx9.reg;-->new
dx9.inf;-->new
cleanup.cmd;-->new
14)compress all files on the folder dx9 (*.exe/*.dll/*.xpg/*.inf),and then copy to \i386 folder,you can found new files between dx8 and dx9:
把所有DX9目录下的文件压缩，复制到\i386,以下是新的文件
d3d9.dll;----->new
dpnaddr.XPG;----->new
dpnlobby.XPG;----->new
dxdiagn.dll;--->new
dxdllreg.inf;-->new
dxdllreg.exe;---->new
dx9.reg;-->new
dx9.inf;-->new
cleanup.cmd;-->new
15)edit the file dosnet.inf and txtsetup.sif, add the newfile in them:
编辑你的 dosnet.inf 和 txtsetup.sif，把下面的文件加进去
dosnet.inf:
d1,d3d9.dll;----->new
d1,dpnaddr.XPG;----->new
d1,dpnlobby.XPG;----->new
d1,dxdiagn.dll;--->new
d1,dxdllreg.inf;-->new
d1,dxdllreg.exe;--->new
d1,dx9.reg;-->new
d1,dx9.inf;-->new
d1,cleanup.cmd;-->new
txtsetup.sif:
d3d9.dll=100,,,,,,,2,0,0
dpnaddr.XPG=100,,,,,,,2,0,0
dpnlobby.XPG=100,,,,,,,2,0,0
dxdiagn.dll=100,,,,,,,2,0,0
dxdllreg.inf=100,,,,,,,2,0,0
dxdllreg.exe=100,,,,,,,2,0,0
dx9.reg=100,,,,,,,2,0,0
dx9.inf=100,,,,,,,2,0,0
cleandup.cmd=100,,,,,,,2,0,0
16)now in you winnt.sif you can use [guirunone] to run dx9.inf
you can use cmdlines.txt to run it.....
最后，你可以在winnt.sif里面的 [guirunone] 段内运行dx9.inf
运行语法可参考微软相关网站：
"rundll32 setupapi,InstallHinfSection DefaultInstall 128 %10%\dx9.inf"
;Because I had replace WMP8 to WMP9 .I don't use this two way ,but add the laylist of "dx9.inf" in the wmp.inf.
; why use cleanup.cmd to replace dpnlobby.dll and dpnaddr.dll? because I found if I replace them on \i386, during windows setup , the OLE regdll section will get error ,so I need to do this .
为什么要用 cleanup.cmd 来替换dpnlobby.dll 和dpnaddr.dll?，而不是直接替换\i386目录下的？因为不这样做的话。OLE控件注册的时候就会报错，只有先用DX8版本的注册后，再替换才可以。 作者: shadowman 时间: 2003-11-17 09:00 标题: 【教学】微软安装光盘集成教学系列(3)Directx 8替换为DX9
有一个问题，上边说：
6)ren this filenameyou need to del the old files"dinput.dll" first.etc)
dinput.xpg--->dinput.dll
dinput8.xpg--->dinput8.dll
dxapi.xpg---->dxapi.sys
gcdef.xpg---->gcdef.dll
joy.xpg---->joy.cpl
pid.xpg---->pid.dll
把dx9目录里的上述文件改名（你首先要删除某些文件。例如dinput.dll等等）
7)del all the *.inf/*.sys/*.png/*.ini
,but keep the file "dxdllreg.inf"
;if you don't del *.sys files ,you will get a warning box during GUI setup "driver whql"
删除所有的*.inf/*.sys/*.png/*.ini，但保留dxdllreg.inf
既然*.sys要删，为什么dxapi.xpg还要改成dxapi.sys？ 作者: astaroth 时间: 2003-11-19 20:37 标题: 【教学】微软安装光盘集成教学系列(3)Directx 8替换为DX9
