EZB 论坛 - Powered by Discuz! Board

标题: 用nero刻录iso文件总是出错 [打印本页]

作者: lanyuan 时间: 2005-12-26 21:15 标题: 用nero刻录iso文件总是出错

今天换了好几张盘总是出现同样的错误，请各位帮帮忙，好郁闷啊！！
下面是用nero出现的错误日志
1A21-0009-5030-2398-2789-0746
1A21-0609-9030-2269-2086-9922
1A4A-0809-9130-2363-0952-9707

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=1.00, size=57344 bytes, created 1999-2-2 19:10:34
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.28, size=172099 bytes, created 2005-1-18 14:19:50
Nero版本： 6.6.0.5
刻录机：             <HP CD-Writer+ 8200a>    版本: 1.0g - HA 2 TA 0 - 6.6.0.5
适配卡驱动程序：    <HPUATA>                HA 2
Drive buffer  :    4096kB
Bus Type    :    default (0) -> ATAPI, detected: ?
CD-ROM:             <HP    CD-Writer+ 8200a>版本: 1.0g - HA 2 TA 0 - 6.6.0.5
适配卡驱动程序：    <HPUATA>                HA 2

=== Scsi-Device-Map ===
DiskPeripheral    : IC35L060AVVA07-0                atapi Port 0 ID 0  DMA: On
CdRomPeripheral    : CD-ROM F566E                   atapi Port 1 ID 1  DMA: Off
                  :                               HPUATA Port 2 ID 0  DMA: Off

=== CDRom-Device-Map ===
CD-ROM F566E             H:
HP CD-Writer+ 8200a       J:
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE          : 0
Physical memory    : 255MB (261616kB)
Free physical memory: 155MB (159396kB)
Memory in use    : 39 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

26.12.2005
光盘映像
20:33:08 #1 Text 0 File Reader.cpp, Line 127
Reader running

20:33:08 #2 Text 0 File Writer.cpp, Line 122
Writer HP    CD-Writer+ 8200a running

20:33:08 #3 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
   MediaCatalogNumber = ''
   TocType = 0x00
   Finalized =  1
   First/Last Track =  1 /  1
   1: ISRC = ''
      Blocksize = 2048
      TrackMode = 'TRM_DATA_MODE1'
      TrackConfig = 0x00
      First/Last Index =  0 /  1
      Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = 411789312
CUES:
   0: Ctrl=0x41 Trk=  0 (0x00) Index=00 Start=954437:08.46 (    -150) RecDep=0x00
   1: Ctrl=0x41 Trk=  1 (0x01) Index=00 Start=954437:08.46 (    -150) RecDep=0x00
   2: Ctrl=0x41 Trk=  1 (0x01) Index=01 Start=00:00.00 (       0) RecDep=0x00
   3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=44:38.69 ( 200919) RecDep=0x00
MTYP: Mediumtype =  CD (old format) (0x1)
Image file name: <G:\Image.nrg>

20:33:08 #4 Text 0 File Burncd.cpp, Line 3155
Turn on 光盘一次刻录, using CD-R/RW media

20:33:23 #5 Text 0 File DlgWaitCD.cpp, Line 257
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written:          200918 ( 44:40.68)

20:33:23 #6 Text 0 File DlgWaitCD.cpp, Line 269
Write in overburning mode: NO (enabled: CD)

20:33:24 #7 Text 0 File DlgWaitCD.cpp, Line 2310
Recorder: HP CD-Writer+ 8200a;
   CDR code: 00 97 27 18; OSJ entry from: Plasmon Data systems Ltd.
   ATIP Data:
      Special Info [hex] 1: D0 00 A0, 2: 61 1B 12 (LI 97:27.18), 3: 4F 3B 4A (LO 79:59.74)
      Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

20:33:24 #8 Text 0 File DlgWaitCD.cpp, Line 431
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: 未知. Medium required by compilation: CD-R/RW.)

20:33:24 #9 Text 0 File ThreadedTransferInterface.cpp, Line 829
Setup items (after recorder preparation)
   0: TRM_DATA_MODE1 (1 - CD-ROM模式1, ISO 9660)
      2 indices, index0 (150) provided
      original disc pos #0 + 200919 (200919) = #200919/44:38.69
      not relocatable, disc pos for caching/writing not required/not required, no patch infos
      -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 200919 blocks [HP    CD-Writer+ 8200a]
--------------------------------------------------------------

20:33:27 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1042
Prepare recorder [HP    CD-Writer+ 8200a] for write in CUE-sheet-DAO
DAO infos:
==========
   MCN: ""
   TOCType: 0x00; Session Closed, disc fixated
   Tracks 1 to 1:
   1: TRM_DATA_MODE1, 2048/0x00, FilePos          0       307200    411789312, ISRC ""
DAO layout:
===========
   __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
      -150 |  lead-in | 0 | 0x41 | 0x00
      -150 |       1 | 0 | 0x41 | 0x00
         0 |       1 | 1 | 0x41 | 0x00
   200919 | lead-out | 1 | 0x41 | 0x00

20:33:27 #11 Phase 24 File dlgbrnst.cpp, Line 1832
文件暂存过程开始

20:33:27 #12 Text 0 File Burncd.cpp, Line 4042
Cache writing successful.

20:33:27 #13 Phase 25 File dlgbrnst.cpp, Line 1832
文件暂存过程完成

20:33:27 #14 Phase 36 File dlgbrnst.cpp, Line 1832
以4x (600 KB/s)的速度开始刻录

20:33:28 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2604
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

20:33:28 #16 Text 0 File Mmc.cpp, Line 16308
StartDAO : CD-Text - Off

20:33:31 #17 Text 0 File Mmc.cpp, Line 16595
CueData, Len=32
41 00 00 14 00 00 00 00
41 01 00 10 00 00 00 00
41 01 01 10 00 00 02 00
41 aa 01 14 00 2c 28 45

20:33:42 #18 SCSI -400 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x04A20000
Status:    0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key:  0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x07 0x20 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x00 0x00 0x00 0x00 0x00 0x12
            0x00 0x00 0x00 0x00 0x00 0x00

20:33:42 #19 CDR -400 File Writer.cpp, Line 311
未指定的目标错误
HP CD-Writer+ 8200a\H2 T0

20:33:42 #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

20:33:42 #21 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

20:34:30 #22 Phase 38 File dlgbrnst.cpp, Line 1832
以4x (600 KB/s)的速度刻录失败

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 2001-8-17 14:07:32
File 'Drivers\HPUATA.sys': Ver=4.2.3.16, size=92832 bytes, created 2001-2-3 5:28:26 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

作者: martinx 时间: 2005-12-27 15:40

20:33:42       #18 SCSI -400 File Cdrdrv.cpp, Line 1432
      SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x04A20000
      Status:    0x04 (0x01, SCSI_ERR)
      HA-Status 0x00 (0x00, OK)
      TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
      Sense Key:  0x00 (KEY_NO_SENSE)
      Sense Code: 0x00
      Sense Qual: 0x00
      CDB Data: 0x2A 0x00 0x00 0x00 0x07 0x20 0x00 0x00 0x20 0x00 0x00 0x00
      Sense Data: 0x70 0x00 0x00 0x00 0x00 0x00 0x00 0x12
                  0x00 0x00 0x00 0x00 0x00 0x00

是SCSI命令执行错误，与刻录设备有关，换其它刻录软件试一下。

作者: lanyuan 时间: 2005-12-27 16:56

感谢版主的帮助，我就用过这个软件别的刻录软件没有用过，我再刻录数据的时候没问题，就是刻录iso文件的时候出现了这个问题，麻烦帮我推荐一个好的刻录软件，谢谢！最好是刻录iso文件好的软件。

作者: zhyd 时间: 2005-12-29 21:10

感谢版主

作者: xhhabc 时间: 2005-12-30 10:54

我也不清楚

作者: yanqi01 时间: 2005-12-30 14:25

不是很明白

作者: 天上下雪 时间: 2005-12-31 09:33

我一直用这个软件，从未出现过什么问题，我用的是明基的刻录机。

作者: 2000fzbm 时间: 2006-1-1 22:39

介绍1个酒精120%软件给你吧

欢迎光临 EZB 论坛 (http://ultraiso.net/ezbbbs/)